• Sign In
  • Register
  • Stockist Locator
WELCOME TO THE SPAREX WEBSITE

New Products

New Products: take a look at our newest online products
Page
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

List  Grid 

  • Replacement Lens - Beacon (Low Profile) for S.113181, S.113185, S.113183
  • Replacement Lens - Beacon (Standard Profile) for S.113180, S.113184, S.113188, S.113186, S.113215
  • Replacement Lens - Beacon (Low Profile) for S.115169 , S.113213, S.114414, S.115170
  • Control Valve
  • LED Work Light Rectangular, 2800 Lumens

    S.130541 - LED Work Light Rectangular, 2800 Lumens

    Light source: 14 x 3W COB SMD LEDs,  Volts: 10-30V,  Housing Type: Aluminium Magnesium Alloy,  Width: 179mm,  Height: 95mm,  Depth: 58mm,  With Noise Suppression: Yes,  Working Temperature °C: -45° to 60°,  IP rating: IP69K,  Cable length: 1000mm,  Power Consumption @ 12V: 2.33Amps,  Power Consumption @ 24V: 1.16Amps
  • LED Work Light Rectangular, 2800 Lumens

    S.130540 - LED Work Light Rectangular, 2800 Lumens

    Light source: 14 x 3W COB SMD LEDs,  Volts: 10-30V,  Housing Type: Aluminium Magnesium Alloy,  Width: 151.8mm,  Height: 102.5mm,  Depth: 60mm,  With Noise Suppression: Yes,  Working Temperature °C: -45° to 60°,  IP rating: IP69K,  Cable length: 200mm,  Power Consumption @ 12V: 1.83Amps,  Power Consumption @ 24V: 0.91Amps
  • Adjustable 2 wheel trolley

    S.151798 - Adjustable 2 wheel trolley

    Adjustable 2 wheel trolley
  • Stabiliser

    S.150419 - Stabiliser

    Min. Length: 440mm Max. Length: 585mm End a; Ball, Ø25.7mm End b: Bolt, Length: 105mm, Thread: M24 x 2 Thread size: M30 x 3.5
  • Stabiliser

    S.150418 - Stabiliser

    Min. Length: 425mm Max. Length: 620mm End a: Ball, Ø19mm End b: Pin, Working length: 106mm, Ø24mm Thread size: M30 x 3.5
  • Stabiliser

    S.150417 - Stabiliser

    Min. Length:604mm Max. Length: 880mm End a: Ball, Ø19mm End b: Pin, Working length: 110.5mm, Ø25.4mm Thread size: M30 x 3.5
  • Stabiliser

    S.150416 - Stabiliser

    Min. Length: 450mm Max. Length: 650mm End a: Ball, Ø25.4mm,  End b: Bolt, Length: 105.5mm, Thread: M24 x 3 Thread size: M27 x 3
  • Digital multimeter

    S.151762 - Digital multimeter

    Measures: Voltage DC : 600V Voltage AC : 600V Current DC : 10A Current AC : 10A Resistance : 20MO Diode check : test current of 1mA maximum, open circuit voltage 2.8V DC typical Continuity test : audible signal will sound if the resistance is less than approximately 30O Temperature: from -20°C to 760°C
  • Multimeter

    S.151761 - Multimeter

    Specially designed for all automotive applications Functions: voltage : AC (3,2V - 1000V) DC (3,2V - 750V) current : AC (32mA - 10A) DC (32mA - 300mA) resistance from 320O to 320KO  frequency from 0,01Hz to 32kHz diode check  RPM from 0 to 12,000 temp. measurement (-20°C - +1370°C)  Automatically turns off after 10 min Accessories: test and temperature probes, test clamps, inductive clamp for tachometer
  • Needle test probe set

    S.151760 - Needle test probe set

    This kit of high quality test leads has been designed for the automotive technician. Each kit includes: A pair of double-insulated silicone test leads, terminated on one side by an insulated straight connector, and on the other by a sheathed right-angle connector, both compatible with standard 4mm connectors A pair of spades for intrusive measurements, ideal when the inverted test is not an option -> category: 30V A pair of flexible measuring needles that allow you to pass through the rubber seal on some connectors without damaging it Test leads can withstand high temperatures (example: exhaust manifolds or soldering iron tip) -> category: 1000V CAT II
  • Diagnostic test lead set

    S.151759 - Diagnostic test lead set

    Complete lead kit for Automotive diagnostics. Content almost all connection leads for connecting to sensors, valves, connectors, injectors All leads are arranged properly in pairs ''Male & Female'' and by terminal sizes Includes ATC adapter Mini and Maxi fuses and ATC Current loop to be used with an Amp Clamp Includes Piercing Extra Sharp Probes. This innovative design gives enough retention force to pierce through the wire’s insulator New variable resistor of with 10KO (instead of 5KO ) dial indicator. Quick and easy way of resistance adjustment without the help of a multi-meter during simulation of resistance related sensing devices Airbags simulator : Used to confirm SRS Airbag power input by connecting it first to check for any short circuit before installing new SRS Replaceable resistors! 3 of 2 ohms - 2,2 ohms – 2,7ohms LED Stroboscope: For checking series of terminals for correct wiring. Also for pulse or signal comparison between injectors. LED turns redfor reverse polarity. LED turns green for correct polarity Also includes general purpose components; Alligator clips, Banana plug to be used with multimeters, 3 ways extension plugs and detachable testprobes Ultra thin lead for multipins connector
Page
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page

List  Grid 

The Sparex website uses cookies to enhance your shopping experience, to improve functionality and to analyse website traffic.
For more information on how we use cookies please click here to read our privacy policy.

© Sparex Ltd. All rights reserved. Sparex Limited is a company registered in England & Wales with number 841771 and VAT Number GB 754 8199 87

These parts are Sparex parts and are not manufactured by the Original Equipment Manufacturer (OEM). Original Manufacturer's names, part numbers and descriptions are quoted for reference purposes only and are not intended to indicate or suggest that our replacement parts are made by the OEM.