USE AND OPERATIONThese valves are used to open or close oil flow in a circuit even at high pressure.MATERIALS AND FEATURESBody: zinc-plated steel.Internal ports: ground and chromium-plated steel.Seals: BUNA N standard.Leakage: does not allow leakage.Fixing holes: (CODEFF)CONNECTIONSConnect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2).
USE AND OPERATIONThese valves are used to open or close oil flow in a circuit even at high pressure.MATERIALS AND FEATURESBody: zinc-plated steel.Internal ports: ground and chromium-plated steel.Seals: BUNA N standard.Leakage: does not allow leakage.Fixing holes: (CODEFF)CONNECTIONSConnect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2).
USE AND OPERATIONThese valves are used to open or close oil flow in a circuit even at high pressure.MATERIALS AND FEATURESBody: zinc-plated steel.Internal ports: ground and chromium-plated steel.Seals: BUNA N standard.Leakage: does not allow leakage.Fixing holes: (CODEFF)CONNECTIONSConnect indifferently A or P to the ports where flow has to be isolated. Flow is blocked with lever at 90° (position 1) and free with lever in line (position 2).
USE AND OPERATIONThese valves are used to divert the inlet flaw towards 2 alternative ports (L scheme).MATERIALS AND FEATURESBody: zinc-plated steel.Internal parts: ground and chromium-plated steel. Seals: BUNA N standard.Leakage: does not allow leakage.Fixing holes: (CODEFF)CONNECTIONSConnect P to the pressure flow, A and B to the circuit ports where the flow has to be diverted to. With the lever at 90° flow is connected in port A (position 1), with lever in line flow is connected in port B (position 2)
USE AND OPERATION3 way diverter valves used to divert the flow towards two different outlets.MATERIALS AND FEATURESBody: cast iron.Internal parts: hardened and ground steel. Seals: BUNA N standard.Leakage: Minimal leakage.Oil temperature: 50° C - Oil viscosity: 30 cStCONNECTIONSConnect P to the supply, A and B to the ports of the hydraulic circuit where flow has to be diverted to. With lever in position 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. With lever in central position ports P, A and B are all connected (open centre)
USE AND OPERATIONThis valve is made up by two 3-way diverter valves coupled together: each of the two valves is used to divert the inlet flow towards two ports. A single lever controls both sections at the same time. Ideal to control two cylinders.MATERIALS AND FEATURESBody: cast iron.Internal parts: hardened and ground steel.Seals: BUNA N standard.Leakage: Minimal leakage.CONNECTIONSConnect P and P to the 2 pressure flows, ports A and B to the first cylinder and ports A and B to the second cylinder. With lever in position 1, P is connected to A and P to AWith lever in position 2, P is connected to B and P to BWith lever in the central position all ports are connected to each other (open centre)
USE AND OPERATIONThis valve is made up by two 3-way diverter valves coupled together: each of the two valves is used to divert the inlet flow towards two ports. A single lever controls both sections at the same time. Ideal to control two cylinders.MATERIALS AND FEATURESBody: cast iron.Internal parts: hardened and ground steel.Seals: BUNA N standard.Leakage: Minimal leakage.CONNECTIONSConnect P and P to the 2 pressure flows, ports A and B to the first cylinder and ports A and B to the second cylinder. With lever in position 1, P is connected to A and P to AWith lever in position 2, P is connected to B and P to BWith lever in the central position all ports are connected to each other (open centre)
