This kit enables the customer to change from a PTO driven Vacuum Pump (MEC6500M & MEC8000M) to a hydraulic operated pump. Kit includes gears, gaskets, seals, bearings, gear box cover and hydraulic motor. Customers may wish to do this as the pump can be controlled much easier when hydraulically driven, with less risk of damage if something were to go wrong inside the pump! This kit fits directly onto the PTO driven (M type) rotor, by replacing all the components from inside the gear box to the hydraulic motor, making this a faster and cheaper way to convert your Vacuum Pump. ContainsS.101843Oil seal 48 x 62 x 8mm (Bag of 4) (Battioni) S.101851Oil Seal 35 x 62 x 10mm (Battioni) S.101852Gear box cover Gasket (Battioni) S.101855Lock Nut - M27 x 2mm (Battioni) S.101857Gear Z23-M2.5 (Battioni) S.101889Seeger Ring Ø80 x 70 x 5mm (Battioni) S.18058Deep Groove Bearing - 6208 (Sparex) S.18107Deep Groove Bearing - 6307 (Sparex) S.18119Deep Groove Bearing - 6304 (Sparex) S.72261Large Gear with Shaft (Battioni) S.72262Gearbox Cover (Battioni) S.72293Orbitol Hydraulic Motor 130cc (Battioni)
