Metal-free ceramic grease to treat parts which are liable to heavy workload and/or which are exposed to very high temperatures. Product characteristics:Protects against electrolytic corrosion.High thermal stability.Prevents wear and sticking.Extremely suitable for mounting ABS and ASR brake systems and lambda sensors.The aerosol should have room temperature.Processing temperature 5 - 30°C.Shake before use.Apply the ceramic grease. The specific properties are achieved after evaporation of the solvent.
Protection against wear, stretching and corrosion. Fully synthetic, colorless grease with excellent lubricity at heavy loads (VKA value: 2.800N approx. 280kg). Thermally stable range: -40° C to 200°C. High penetration. Optimal adhesion. Splash water protection. Suited for O-, X- and Z-rings. Clean the chain and apply product. Allow 10 minutes before placing in service again.
Eliminates disruptions due to moisture in ignition and electrical systems.Product Properties:Efficient and durable cleaning power.Eliminates and displaces moisture.Efficient on steel, iron, light-alloy metal, and synthetic materials.Optimal penetration guarentees efficiencyThermally stable range: -50° C to +180° C.
Used for detection of leaks in gas and compressed air systems.Suitable for all gas installations and testing equipment.Reveals even tiny leaks in plastic and metal pipes.Thermally stable range: -15°C to 50°C.Neutral ph-value and compatible with all seals and materials used in installations.Not combustible.Does not react with gases or refrigerants.DVGW approval (the German regulation for gas installations) acc. to DIN EN 14291.Apply evenly.Clearly visible bubbles will form at leaks, cracks or porous areas.Rinse off with water afterwards.Do not apply horizontally!
Lubrication of moving parts subject to heavy loads such as pressure, impacts, and vibrations.Product properties:For lubrication of pulleys, sprockets, joints, gears, rollers, hinges, linkages, sliding disks, etc.Excellent penetration and corrosion protection.Extremely good lubricity - even at high pressure(VKA value acc. to DIN 51350: 2.400 N ) (approx. 529,11 lb).Excellent dry lubricity and emergency run properties due to the PTFE contents.Prevents and eliminates dragging parts, creaks and jarring noises.Fine durability against chemicals, sprays and sea water.Thermally stable range: +30° C to +250° C.Silicone-free and acid-free.
Universal disassembly, anti-friction, maintenance and lubricant spray for synthetics - and roller bearings, hinges, sliding bars, pulleys, electrical connections, etc.Product properties:Provides fine long term insulation on electrical connections.Seizing and water resistant.Efficient oxydation and corrosion protection.Prevents and eliminates jarring noises.Excellent lubrication and anti-friction agent.(VKA value acc. to DIN 51350: 1.000 N).Acid-free, does not solidify.Non-conductive. Colorless.Thermally stable range: -30° C to +200° C.
Universal lubricant for lubrication and corrosion protection of heavily loaded parts.Product properties:Lubricant and preservative for joints, gears, rollers, hinges, ball joints, linkages, sliding bars, etc.Lubricates also hard to reach places thanks to really good penetration.Good lubricity even at heavy load.(VKA value acc. to DIN 51350: 1.400 N ) (approx. 140 kg)Excellent adhesion - even on vertical surfacesEfficient protection against wear, corrosion, and oxidation.Excellent moisture and water restance.Thermally stable range: -40° C to +250° C.Silicone-free and acid-free.
Effective tool to loosen rusted or pressed connections.Product characteristics:Directed jet spray.Briefly lowers temperature to -50°C.The aerosol should have room temperature.Processing temperature 5 - 30°C.Spray the connection by repeatedly pressing the nozzle briefly. As a result of the fierce decrease in temperature, the connection can be loosed.
Solvent free hand cleaning gel for removing greases and lubricants.Very suitable for use in garages, workshops an maritime industry.Use:Rub a small amount of hand cleaner into dry hands until dirt loosens.Rinse with water and dry hands thoroughly.Store under cool but frost-free temperatures.Keep out of reach of children.Dermatologically tested and produced under ISO9001 circumstances.
Solvent free hand cleaning gel for removing greases and lubricants.Very suitable for use in garages, workshops an maritime industry.Use: Rub a small amount of hand cleaner into dry hands until dirt looses.Rinse with water and dry hands thoroughly.Store under cool but frost-free temperatures.Keep out of reach of children.Dermatologically tested and produced under ISO9001 circumstances.
Separator and lubricant for connections and fittings exposed to high loads and temperatures. Used as a collector paste on turbines, exhaust pipes, axles, gears, valves, chains, joints and rails. Brakes, couplings, friction surfaces, etc.Product Features:Especially suitable for stainless steel surfaces. Not suitable as bed lubrication.The product is applied with special brush applied to the spray can. Prevents permanent joining of metal parts made of copper, stainless steel, zinc, aluminum, etc.Extra effective attachment. Resistant to hot and cold water. Does not contain silicone or metal.Non-conductive, prevents electrochemical corrosion. Temperature range from -20°C to 1500°C.
Specially developed for retractable seatbelt maintenance.Product properties:The product keeps retractable belts supple and freshens up their colours.The product doesn’t come off.Suitable as well for maintenance of rubber and plastic parts, and as antifriction compound on sliding parts such as rollers, machines, tools, conveyors, etc.Contains silicone.
Fast loosening of extremely rusty thread connections.Product properties:Penetrates rust, dissolves ground-in dirt, oil, etc. efficiently.Really excellent penetration.Works fast thanks to extreme down cooling to -40°C.Fast penetration of active agents via microscopical fissures in corrosion layers.Lubricity on account of PTFE contents (Teflon)Silicone-free and acid-free.Does not solidify.
Oil to prevent over-heating of metals in cutting and drilling activities.Product characteristics:Protects and lubricates the tool.Reduces wear of the tool.Non-corrosive.Silicone free.Shake before use.Before processing, spray the tool and the material generously. The tool and the material must remain moist during the activities.
Loosens and lubricates rust seized unions and connections.Product properties:Loosens and lubricates stuck corroding connections.Graphite content provides extra lubrication preventing seizure of screws, washers, and bolts at mountening and dismountening.Provides fine pressure resistant lube film (VKA value acc. to DIN 51350: 1,200 N).Displaces moisture and prevents jarring noises as well as slackness from wear and friction. Protects and maintains materials.Thermally stable range: -30° C to 450° C.Silicone-free, does not solidify.
