Stylish and easy-to-wear. The SLAM model provides protection at all times while offering unbeatable comfort.CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.After each use it is recommended to keep the spectacles in a rigid case (S.162430).Wrap around Fit.All Round Vision.Comfortable Straight Temples.Resistance to surface damage by fine particles at extreme temperatures.Resistance to fogging.Lens & frame low energy impact, resists a 6mm, 0.86 g ball at 45m/s.Supplied with adjustable cord.CE Approved
A comfortable and ultra lightweight polycarbonate model. SILIUM+ is an excellent choice, combining style, ergonomics and performances for extended use.CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.After each use it is recommended to keep the spectacles in a rigid case (S.162430).The new exclusive scratch and fog resistant coating guarantees even more safety, reliability and comfort.Washable (water and soap), this permanent coating applied on both sides of the lens makes it highly scratch resistant and durably delays the appearance of fogging.Ultra lightweight Frame.Resistance to surface damage by fine particles at extreme temperatures.Resistance to fogging.Lens & frame low energy impact, resists a 6mm, 0.86 g ball at 45m/sStraight, Highly Flexible Ergonomic Temples.Non-Slip adjustable bridge.All-round Vision.Resistance to surface damage by fine particlesFree micro fibre bag.CE Approved
Panoramic and lightweight CONTOUR model is a sturdy, stylish, comfortable and lightweight while providing quality in a modern sturdy design.CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.After each use it is recommended to keep the spectacles in a rigid case (S.162430).Non slip bridge.Non slip tip-grip temples.Anti-staticAll round visionResistance to surface damage by fine particles at extreme temperatures.Resistance to fogging.Low energy impact, resists a 6mm, 0.86g ball at 45m/s.Frame has protection against everyday risks including dropping onto the ground, ageing by light exposure & exposure to heat or corrosion.Supplied with micro-fibre pouch.CE Approved
Panoramic and lightweight RUSH model offers perfect optical quality, permanent comfort and modern design. Frame has protection against everyday risks including dropping onto the ground, ageing by light exposure & exposure to heat or corrosion.CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.After each use it is recommended to keep the spectacles in a rigid case (S.162430).Upper protection.Adjustable non slip bridge.Non slip temples.All-round Vision.Resistance to surface damage by fine particles at extreme temperatures.Low energy impact, resists a 6mm, 0.86g ball at 45m/s.Supplied with Cord.CE Approved
SILEX has a panoramic vision, an ultra-wraparound protection, lenses with a refined design and coloured temples by Bollé Safety. No compromise on performance, comfort, style and accessibility, SILEX is suitable for all industries such as Agriculture, construction, automotive, mining, production line. FLEX 160° technology to perfectly fit each face, bi-material temples for flexibility and perfect support without pressure points.CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.After each use it is recommended to keep the spectacles in a rigid case (S.162430).Ultra Wraparound Frame.PC/TPR co-injected temples for greater comfort.Panoramic field of vision.Resistance to surface damage by fine particles.Resistance to fogging.Lens & frame low energy impact, resists a 6mm, 0.86g ball at 45m/s.CE Approved
Stylish and easy-to-wear. The SLAM model provides protection at all times while offering unbeatable comfort.CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.After each use it is recommended to keep the spectacles in a rigid case (S.162430).Wrap around Fit.All Round Vision.Comfortable Straight Temples.Resistance to surface damage by fine particles at extreme temperatures.Resistance to fogging.Lens & frame low energy impact, resists a 6mm, 0.86 g ball at 45m/s.Supplied with adjustable cord.CE Approved
Ultra-comfortable and technical TRACKER provides protection from all mechanical risks and also chemical risks making it unique in the safety glasses range.CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using the B-clean lens cleaning system (S.162431).MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the complete product. If the frame is damaged also replace the complete product.After each use it is recommended to keep the spectacles in a rigid case (S.162430).Upper protection.Side ventilation.Removable foam reinforcement with direct ventilation.Lower protection.Removable adjustable strap.Resistance to surface damage by fine particles at extreme temperatures.Resistance to fogging.Lens and frame low energy impact, resists 6mm, 0.86g ball at 45 m/s - when worn without strapLens and frame medium energy impact, resists 6mm, 0.86g ball at 120m/s - when worn with strapFrame has protection against everyday risks including dropping onto the ground, ageing by light exposure & exposure to heat or corrosion.Frame resistant to Liquid droplets or splashes & large dust particles up to 5 micronsSupplied with micro-fibre pouch & strap.CE Approved
BS 2092 1CDMProvides full eye protection against chemical splash, dust and molten metal hazards.Special ventilation slits prevent dust and small particles entering.
Headband: Durable and non-conductive construction to be worn over-the-head. Features a soft replaceable cushion that rests lightly on your head for comfortable use the entire working day.Made of high quality plastic: Durable construction made from thermoplastics that withstand rough environments and variable temperatures without ever loosing its clamping force and flexibility. This non-conductive construction makes it a perfect choice for working close to electrical sources.Telescopic size adjustment: Smooth and easy size adjustment with one single adjustment point, eliminating any risk of tilting, for a tight and comfortable fit.Replaceable cushions with ''snap-in'' system: Comfortable cushions with minimal sweat retention and soft foam filling increases comfort. The snap-in system enables regular replacement for a long-lasting and hygienic product with high performance.Integration with face protection: The unique visor integration allows you to combine any of Hallberg's hearing protectors with face protection.Noise Protection Level: Hellberg hearing protectors are divided into three noise protection levels, ranging from low to high noise protection. These are clearly indicated with bright safety colours for easy identification and selection.The headband style hearing protectors offer great comfort and quality to all professional users. A light and durable headband construction with soft cushions and easy size adjustment provides a perfect fit for all head sizes. Protection level 1 is suitable for low to medium noise levels, between 75-90 dB. A perfect choice for noise protection in many different work environments, such as general manufacturing industries, working with electric power tools and for short term noise exposures.Protection level 1 for low to medium noiseVery slim and light weightComfortable headband with soft padding
Helmet mounted: Helmet attachment arms with a strong steel spring mechanism, lasting more than 10 000 oscillations which represents normal use of at least 5 years. No exposed metal parts for non-conductivity.Three wearing positions: Park the hearing protector on the rear of the helmet when not in use, put them in stand-by position slightly off the ears, and push them inwards into working position covering the ears.Approved with most popular helmets: Hellberg's helmet-mounted hearing protectors are all approved in combination with most popular safety helmets on the market – more than 45 different models. Always make sure your combination is tested and approved before you combine personal protective equipment.Replaceable cushions with ''snap-in'' system: Comfortable cushions with minimal sweat retention and soft foam filling increases comfort. The snap-in system enables regular replacement for a long-lasting and hygienic product with high performance.Integration with face protection: The unique visor integration allows you to combine any of Hellberg's hearing protectors with face protection.Noise Protection Level: Hellberg hearing protectors are divided into three noise protection levels, ranging from low to high noise protection. These are clearly indicated with bright safety colours for easy identification and selection.The helmet mounted earmuff is the ideal choice for any work that requires head and hearing protection. Its durable construction withstands rough environments and the slim design reduces the risk of snagging in branches or confined areas. Protection level 1 is suitable for low to medium noise levels, between 75-90 dB A perfect choice for noise protection in many different work environments such as general manufacturing industries, working with electric power tools and for short term noise exposures.Protection level 1 for low to medium noiseVery slim and light weightApproved with most popular safety helmets
Headband: Durable and non-conductive construction to be worn over-the-head. Features a soft replaceable cushion that rests lightly on your head for comfortable use the entire working day.Made of high quality plastic: Durable construction made from thermoplastics that withstand rough environments and variable temperatures without ever loosing its clamping force and flexibility. This non-conductive construction makes it a perfect choice for working close to electrical sources.Telescopic size adjustment: Smooth and easy size adjustment with one single adjustment point, eliminating any risk of tilting, for a tight and comfortable fit.Replaceable cushions with ''snap-in'' system: Comfortable cushions with minimal sweat retention and soft foam filling increases comfort. The snap-in system enables regular replacement for a long-lasting and hygienic product with high performance.Integration with face protection: The unique visor integration allows you to combine any of Hallberg's hearing protectors with face protection.Noise Protection Level: Hellberg hearing protectors are divided into three noise protection levels, ranging from low to high noise protection. These are clearly indicated with bright safety colours for easy identification and selection.The headband style hearing protectors offer great comfort and quality to all professional users. A light and durable headband construction with soft cushions and easy size adjustment provides a perfect fit for all head sizes. Protection level 2 is suitable for medium to high noise levels, between 90-110 dB. It is the best choice for noise protection in environments such as building and construction, heavy industrial work and for long term noise exposures.Protection level 2 for medium to high noiseBest choice for high frequency noiseComfortable headband with soft padding
Helmet mounted: Helmet attachment arms with a strong steel spring mechanism, lasting more than 10 000 oscillations which represents normal use of at least 5 years. No exposed metal parts for non-conductivity.Three wearing positions: Park the hearing protector on the rear of the helmet when not in use, put them in stand-by position slightly off the ears, and push them inwards into working position covering the ears.Approved with most popular helmets: Hellberg's helmet-mounted hearing protectors are all approved in combination with most popular safety helmets on the market – more than 45 different models. Always make sure your combination is tested and approved before you combine personal protective equipment.Replaceable cushions with ''snap-in'' system: Comfortable cushions with minimal sweat retention and soft foam filling increases comfort. The snap-in system enables regular replacement for a long-lasting and hygienic product with high performance.Integration with face protection: The unique visor integration allows you to combine any of Hellberg's hearing protectors with face protection.Noise Protection Level: Hellberg hearing protectors are divided into three noise protection levels, ranging from low to high noise protection. These are clearly indicated with bright safety colours for easy identification and selection.The helmet mounted earmuff is the ideal choice for any work that requires head and hearing protection. Its durable construction withstands rough environments and the slim design reduces the risk of snagging in branches or confined areas. Protection level 2 is suitable for medium to high noise levels, between 90-110 dB It is the best choice for noise protection in environments such as building and construction, heavy industrial work and for long term noise exposures.Protection level 2 for medium to high noiseBest choice for high frequency noiseApproved with most popular safety helmets
Combination of Secure 2 Headband hearing protector and SAFE clear polycarbonate visor. Maximum comfort and protection for work that requires hearing and face protection. Very good ventilation and protection against impacts.
Headband: Durable and non-conductive construction to be worn over-the-head. Features a soft replaceable cushion that rests lightly on your head for comfortable use the entire working day.Made of high quality plastic: Durable construction made from thermoplastics that withstand rough environments and variable temperatures without ever loosing its clamping force and flexibility. This non-conductive construction makes it a perfect choice for working close to electrical sources.Telescopic size adjustment: Smooth and easy size adjustment with one single adjustment point, eliminating any risk of tilting, for a tight and comfortable fit.Replaceable cushions with ''snap-in'' system: Comfortable cushions with minimal sweat retention and soft foam filling increases comfort. The snap-in system enables regular replacement for a long-lasting and hygienic product with high performance.Integration with face protection: The unique visor integration allows you to combine any of Hallberg's hearing protectors with face protection.Noise Protection Level: Hellberg hearing protectors are divided into three noise protection levels, ranging from low to high noise protection. These are clearly indicated with bright safety colours for easy identification and selection.The headband style hearing protectors offer great comfort and quality to all professional users. A light and durable headband construction with soft cushions and easy size adjustment provides a perfect fit for all head sizes. Protection level 3 is suitable for high to very high noise levels, between 100-115 dB. Fortunately a rare environment for most workers, but the best and only choice when nothing else will do. Protection level 3 is also the best choice when the noise is dominated by low frequencies, a type of noise that masks out speech and other important sounds, as well as causing stress and nausea.Protection level 3 for high to very high noiseBest choice for low frequency noiseComfortable headband with soft padding