USE AND OPERATION3 way diverter valves used to divert the flow towards two different outlets.MATERIALS AND FEATURESBody: cast iron.Internal parts: hardened and ground steel. Seals: BUNA N standard.Leakage: Minimal leakage.Oil temperature: 50° C - Oil viscosity: 30 cStCONNECTIONSConnect P to the supply, A and B to the ports of the hydraulic circuit where flow has to be diverted to. With lever in position 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. With lever in central position ports P, A and B are all connected (open centre)
USE AND OPERATIONThis valve is made up by two 3-way diverter valves coupled together: each of the two valves is used to divert the inlet flow towards two ports. A single lever controls both sections at the same time. Ideal to control two cylinders.MATERIALS AND FEATURESBody: cast iron.Internal parts: hardened and ground steel.Seals: BUNA N standard.Leakage: Minimal leakage.CONNECTIONSConnect P and P to the 2 pressure flows, ports A and B to the first cylinder and ports A and B to the second cylinder. With lever in position 1, P is connected to A and P to AWith lever in position 2, P is connected to B and P to BWith lever in the central position all ports are connected to each other (open centre)
USE AND OPERATIONThis valve is made up by two 3-way diverter valves coupled together: each of the two valves is used to divert the inlet flow towards two ports. A single lever controls both sections at the same time. Ideal to control two cylinders.MATERIALS AND FEATURESBody: cast iron.Internal parts: hardened and ground steel.Seals: BUNA N standard.Leakage: Minimal leakage.CONNECTIONSConnect P and P to the 2 pressure flows, ports A and B to the first cylinder and ports A and B to the second cylinder. With lever in position 1, P is connected to A and P to AWith lever in position 2, P is connected to B and P to BWith lever in the central position all ports are connected to each other (open centre)